hard drive is suddenly broken
If we find the hard drive is suddenly broken and sometimes we are so confused what to do because they feel must be what you do when the hard drive is not damaged or sudden mati.Mungkin terdeksi this on this occasion we want to share: The first analysis is the presence of excess voltage from the power supply to the to the hard drive (Over Voltage)
Preparatio
n Tool:
1. Star screwdriver: to open the hard drive screws board.
2. Multitester: to check the short-circuit diode components.
3. Solder and Tin / tenol: who is used to replace damaged components.
4. Spare parts diode 1A - 2A: buy electronics stores.
Seagate Hard Drive How to Service a short-circuit:
• For short-circuit that lies the hard drive components on the inside, you need to open the screw at boardnya.
• To drive short-circuit that component has been seen directly, you do not need to open boardnya.
• short-circuit on the Seagate hard drive is often the case in parts DIODE voltage 12 volt safety. Voltage 12 voltnya the power supply cables are colored yellow. While the red wire voltage 5 volts. Sometimes DIODE safety voltage of 5 volts was also short-circuit but rarely.
• Check the safety DIODE voltnya voltage 12. also check the security DIODE 5 voltnya. see in the picture. How to check a diode can be read here. A good way of soldering can be found here
• Immediately replace the hard drive that short-circuit diode diodes tersebut.dengan 1-2 Ampere, purchased at many electronics stores. Note the position of the anode and cathode. Actually, by simply removing the damaged diodes without replacing them, your hard drive w
ill be back to normal. However, we do not recommend this way, because without diode protection if there is no over voltage / overload voltage.
• Hard disk ready at trial.
we can not guarantee it works 100%, because it could be the chipset disk has joined a short-circuit / damaged. But from our experience, many Seagate hard drive, especially brands that can be back to normal again.
Preparatio
n Tool:1. Star screwdriver: to open the hard drive screws board.
2. Multitester: to check the short-circuit diode components.
3. Solder and Tin / tenol: who is used to replace damaged components.
4. Spare parts diode 1A - 2A: buy electronics stores.
Seagate Hard Drive How to Service a short-circuit:
• For short-circuit that lies the hard drive components on the inside, you need to open the screw at boardnya.
• To drive short-circuit that component has been seen directly, you do not need to open boardnya.
• short-circuit on the Seagate hard drive is often the case in parts DIODE voltage 12 volt safety. Voltage 12 voltnya the power supply cables are colored yellow. While the red wire voltage 5 volts. Sometimes DIODE safety voltage of 5 volts was also short-circuit but rarely.
• Check the safety DIODE voltnya voltage 12. also check the security DIODE 5 voltnya. see in the picture. How to check a diode can be read here. A good way of soldering can be found here
• Immediately replace the hard drive that short-circuit diode diodes tersebut.dengan 1-2 Ampere, purchased at many electronics stores. Note the position of the anode and cathode. Actually, by simply removing the damaged diodes without replacing them, your hard drive w
ill be back to normal. However, we do not recommend this way, because without diode protection if there is no over voltage / overload voltage.• Hard disk ready at trial.
we can not guarantee it works 100%, because it could be the chipset disk has joined a short-circuit / damaged. But from our experience, many Seagate hard drive, especially brands that can be back to normal again.
Komentar