How Service Epson R210 / R230 Ink and Resume Lights Blink / Fast Blinking Red:

How Service Epson R210 / R230 Ink and Resume Lights Blink / Fast Blinking Red:

Early indications:
When the printer is turned on, the printer will look normal and do the calibration with head movement to the right and left on a regular basis. But at the end of the printer calibration process stopped completely with ink indicator light and resume light (which the paper symbol) flashing / red blink rapidly. Printer standstill.

Cause:
Epson R210 / R230 Light Ink and Blink Resume / Flashing Red Dial, due to the closing of the sensor under the head by the ink overflow, and eventually the printer will protect themselves by quitting completely.


Service Solutions Epson R210 / R230 Ink and Resume Lights Blink / Fast Blinking Red:

1. Unloading Epson R210 / R230.

2. Take Head Headnya and see the bottom, there you will find a small sensor which is normally closed / submerged ink.



3. Clean the sensor R210 / R230 it.

4. If the problem still the same, namely light and Resume Ink R210 / R230 still blink / blink fast, then you should replace the sensor and cable.